Cub Cadet 394 Betreibershandbuch

Stöbern Sie online oder laden Sie Betreibershandbuch nach Mini-Bodenfräsen Cub Cadet 394 herunter. Cub Cadet 394 Operator`s manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 20
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
PRINTED IN U.S.A.
FORM NO. 769-01516
Model Number
394
190-394-100
IMPORTANT:
50" MOWER DECK
READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
INSTALLATION AND
Operator’s Manual
MAINTENANCE INSTRUCTIONS
(10/04)
CUB CADET LLC P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 [www.cubcadet.com]
For Series 3000 Tractors
Seitenansicht 0
1 2 3 4 5 6 ... 19 20

Inhaltsverzeichnis

Seite 1 - Operator’s Manual

PRINTED IN U.S.A.FORM NO. 769-01516Model Number394190-394-100IMPORTANT:50" MOWER DECKREAD SAFETY RULES AND INSTRUCTIONS CAREFULLYINSTALLATION AND

Seite 2 - IMPORTANT

109. Guide the LH and RH lift links into the slots of therear deck brackets and release the deck supportpins by aligning with the inner holes of the d

Seite 3

11B. REMOVAL OF DECKPlace the tractor and mower deck on a firm and levelsurface with enough room to slide the deck out from theleft side of the tracto

Seite 4

12SECTION III. ADJUSTMENTSDECK LEVELING ADJUSTMENTSIn order to achieve even cutting, the mower deck mustbe properly leveled. This leveling procedure w

Seite 5 - TO THE OWNER

13Figure 19 2. Measure and record the distance from the frontcutting edge to the ground (measure A), and fromthe rear cutting edge to the ground (mea

Seite 6 - DECK ASSEMBLY

14USING HEIGHT ADJUSTMENT KNOBNOTETractors built Mfg. Code 1K060G and after areequipped with a height adjustment knob whichcan be used to set the down

Seite 7

15SECTION IV. MAINTENANCECLEANING THE DECK Using The Deck Wash SystemWARNINGWhen using the deck wash system, neverengage the deck from any position ot

Seite 8

16When reinstalling the blades, be sure they are installedso that the wind wings are pointing upward toward thetop of the deck. Tighten the nuts to 90

Seite 9

17Figure 28 INSTALL NEW SPINDLE BELT1. Lift the gear box/mounting bracket assembly toinstall the belt around the rear of the drive pulleyand through

Seite 10

18LUBRICATION GUIDEThe life of any machine depends upon the care it is given. Proper lubrication is a very important partof that care.Be certain that

Seite 11

19PRODUCT GRAPHICSKeep safety product graphics (decals) clean. Replaceany safety graphic that is damaged, destroyed,missing, painted over or can no lo

Seite 12 - SECTION III. ADJUSTMENTS

2CONTENTSSection PageSafe Operation Practices ...

Seite 13

MANUFACTURER’S LIMITED WARRANTY FOR:The limited warranty set forth below is given by Cub Cadet LLC with respect to new merchandise purchased and used

Seite 14 - ADJUSTMENT

35. Be sure the area is clear of other people beforemowing. Stop machine if anyone enters the area.6. Never carry passengers.7. Disengage the blades b

Seite 15 - SECTION IV. MAINTENANCE

4Do not try to stabilize the machine by putting your footon the ground.Do not use the grass catcher on steep slopes.Do not tow heavy pull behind attac

Seite 16

514. Observe proper disposal laws and regulations.Improper disposal of fluids and materials canharm the environment and the ecology.a. Prior to dispos

Seite 17

6SECTION I. TRACTOR AND DECK PREPARATIONA. DECK PREPARATIONWARNINGWhen handling the mower deck, be careful notto cut yourself on the sharp blades.Remo

Seite 18 - LUBRICATION GUIDE

7WARNINGPlace the tractor on a level surface and engagethe parking brake lever.NOTETractors built Mfg. Code 1K060G and after areequipped with a deck d

Seite 19

8SECTION II. INSTALLATION AND REMOVAL OF MOWER DECK A. INSTALLATION OF DECKAfter locking the left lift link as described in Section I ,start the tract

Seite 20

95. Unlock the left lift link by sliding the left lift rod fullyrearward in the slot of the lift link (See Figure 8).Figure 8 NOTEThe following step

Kommentare zu diesen Handbüchern

Keine Kommentare