Cub Cadet CC98 Betreibershandbuch PDF herunterladen (Seite 11)

Controls and Features

Figure 4-1

Blade Control

The blade control is attached to the upper handle of the mower.

Depress and squeeze it against the upper handle to operate the

unit. Release it to stop engine and blade.

WARNING: This blade control is a safety device.

Never attempt to bypass its operations.

Cutting Height Adjustment Lever

The cutting height adjustment lever is located above the left

rear wheel. To adjust the cutting height, refer to the Assembly &

Set-Up section.

Drive Control

The drive control is located on the upper handle. Squeeze the

drive control to engage the drive system. Release the drive

control to slow down when approaching an obstacle, making a

turn, or stopping.

Recoil Starter

Blade Control

Choke Control

Drive Control

Cutting Height

Adjustment Lever

Side Discharge

Chute

Choke Control

The choke control is located on the left side of the handle and

when activated, closes the choke plate on the carburetor and

aids in starting the engine. Pull the choke control to activate the

choke on the engine. Use of the choke may not be necessary if

the engine is warm or the air temperature is high.

Side Discharge Chute

Your mower is shipped as a mulcher. To discharge the grass

clippings to the side instead, follow the instructions in the

Assembly & Set-Up section to attach the side discharge chute.

WARNING: Keep hands and feet away from the

chute area on cutting deck. Refer to warning label

on the unit.

Recoil Starter

The recoil starter is connected to the support rod and is located

on the right side of the lower handle. Stand behind the unit and

pull the recoil starter rope to start the unit.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Keine Kommentare

Cub Cadet CC98 Betreibershandbuch Seite 11