Cub Cadet SLTX 1054 Betreibershandbuch PDF herunterladen (Seite 18)

2.



NOTE: Always operate the tractor with the throttle lever in the

FAST (rabbit) position for the most efficient use of the cutting

deck or other (separately available) attachments.

Mowing

WARNING! To help avoid blade contact or a

thrown object injury, keep bystanders, helpers,

children and pets at least 75 feet from the machine

while it is in operation. Stop machine if anyone

enters the area.

The following information will be helpful when using the cutting

deck with your tractor.

WARNING! 

discharge of materials toward roads, sidewalks,

bystanders and the like. Also, avoid discharging

material against a wall or obstruction which may

cause discharged material to ricochet back toward

the operator.

Do not mow at high ground speed, especially if a mulch kit 

or grass collector is installed.

Do not cut the grass too short. Short grass is prone to weed 

growth and yellows quickly in dry weather.

Always operate the tractor with the throttle lever in the 

FAST (rabbit) position while mowing.

For best results it is recommended that the first two laps be 

cut with the discharge thrown towards the center. After the

first two laps, reverse the direction to throw the discharge

to the outside for the balance of cutting. This will give a

better appearance to the lawn.



extremely tall grass. Your tractor is designed to mow lawns,



Keep the blades sharp and replace the blades when worn.

Mulching (If Equipped)

Select models come equipped with a mulch kit which

incorporates special blades, already standard on the tractor, in

a process of recirculating grass clippings repeatedly beneath

the cutting deck. The ultra-fine clippings are then forced back



following points for the best results when mulching:

Never attempt to mulch if the lawn is damp. Wet grass 

tends to stick to the underside of the cutting deck

preventing proper mulching of the clippings.

 ⁄ the total height

⁄

the clippings to clump up beneath the deck and not be

mulched effectively.

Maintain a slow ground speed to allow the grass clippings 

more time to effectively be mulched.

Always position the throttle control lever in the FAST 

(rabbit) position and allow it to remain there while mowing.

Failing to keep the engine at full throttle places strain



properly mulch grass.

NOTE: It is not necessary to remove the discharge chute to

operate the mower with the mulch kit installed.

To operate the cutting deck without mulching, simply remove

the mulch plug by pivoting the discharge chute up and pulling

the plug outward.

To reinstall plug:

Locate two rectangular holes on the cutting deck surface. 



See Fig. 5-4.

Insert the mulch plug, aligning the top edge of the plug 2.

with the deck as shown in the Fig. 5-4. Make sure the

notches on the plug are in the slots on the deck opening.

Lightly tap on the plug with your hand to assure that the 

notches fit snugly under the chute tabs

Figure 5-4

Figure 5-3

OFF

18 se c t i O n 5 — Op e r a t i O n

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Cub Cadet SLTX 1054 Betreibershandbuch Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Rasenmäher Cub Cadet SLTX 1054