Cub Cadet 528 SWE Betreibershandbuch PDF herunterladen (Seite 11)

Snow thrower controls and features are described below and

illustrated in Fig. 4-1.

NOTE: For detailed information on all engine controls, refer to

the separate Briggs & Stratton Engine Operator’s Manual.

Shift Lever

The shift lever is located in the right side of the

handle panel and is used to determine ground

speed and direction of travel.

Forward

There are six forward (F) speeds. Position one (1) is

the slowest and position six (6) is the fastest.

Reverse

There are two reverse (R) speeds. One (1) is the

slower and two (2) is the faster.

Choke Control

The choke control is found on the top of the engine and is

activated by rotating the knob clockwise. Activating the choke

control closes the choke plate on the carburetor and aids in

starting the engine.

Ignition Key

The ignition key is a safety devise. It must be fully inserted in

order for the engine to start. Remove the ignition key when the

snow thrower is not in use.

Note: Do not turn the ignition key in an attempt to start the

engine. Doing so may cause it to break.

Figure 4-1

Recoil Starter

Handle

Electric Start

Button

Electric Outlet

Primer

Ignition

Key

Stop Switch

Choke

Control

Oil Fill

Drive Control

Chute Assembly

Gas Cap

Shift Lever

Auger Control

Chute Directional Control

Clean Out

Tool

Augers

Skid Shoe

Steering Trigger Control

Controls and Features

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Cub Cadet 528 SWE Betreibershandbuch Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schneewerfer Cub Cadet 528 SWE