Cub Cadet 435A Spezifikationen PDF herunterladen (Seite 114)

RZT-S

108

To replace the 46” deck belt:

1. Remove the deck as described at the beginning of

this chapter.

NOTE: Removal of the deck is not necessary, but

makes it easier to route the belt around the

spindles.

2. Loosen the idler pulleys enough to allow the belt to

slip between them and the belt keepers.

3. Slide the belt off of the pulleys.

4. Route the new belt around the pulleys.

See Figure 7.8.

5. Tighten the idler pulleys.

6. Install the deck as describe at the beginning of this

chapter.

7. Test run the mower before returning to service.

To replace the 50” deck belt:

1. Remove the deck as described at the beginning of

this chapter.

NOTE: Removal of the deck is not necessary, but

makes it easier to route the belt around the

spindles.

2. Loosen the two rear idler pulleys enough to allow

the belt to slip between them and the belt keepers.

3. Slide the belt off of the pulleys.

4. Route the new belt around the pulleys.

See Figure 7.9.

5. Tighten the idler pulleys.

6. Install the deck as described at the beginning of this

chapter.

7. Test run the mower before returning to service.

w%FDLCFMUSPVUJOH

Figure 7.8

w%FDLCFMUSPVUJOH

Figure 7.9

www.mymowerparts.com

For Discount Cub Cadet Parts Call 606-678-9623 or 606-561-4983

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 135 136

Keine Kommentare

Cub Cadet 435A Spezifikationen Seite 114